Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

intersection point coordinates in CATIA VBA

Status
Not open for further replies.
Saliome

Saliome

Student
Joined
Nov 21, 2022
Messages
1
Location
GE
I have automated intersecting Pad to Line which results in 2 points. I am trying to get intersecting points Coordinates. Can anybody suggest a way of how can I get? At this moment I have only 1 intersection point and my code is working. but if I have 2 points of intersection I get an error "The method GetPoint failed". what can I do to solve it?
Thanks.
 
Status
Not open for further replies.

Similar threads

John Jr
  • Question Question
Create Tab on Catia sheet metal flange
Replies
0
Views
3K
John Jr
John Jr
Galbert99
  • Locked
  • Question Question
multi section catia
Replies
2
Views
2K
Galbert99
Galbert99
T
  • Question Question
I am looking for a better Pivot point design for linkages
Replies
3
Views
2K
IRstuff
IRstuff
F
  • Locked
  • Question Question
How to calculate bending moment for a “+” shaped frame made from square tubing with a point load in the center?
Replies
9
Views
4K
BAretired
BAretired
a126z
  • Locked
  • Question Question
load point
Replies
3
Views
245
rb1957
rb1957

Part and Inventory Search

Sponsor

Back
Top