Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Interpart copy from one assembly to another?

Status
Not open for further replies.

Superslinky

Automotive
Joined
Sep 26, 2005
Messages
101
Location
US
Hey guys, is there any way to inter-part copy from one assembly to another? I have one main assembly with many sub assembly's and want to use them to boolean a cutout but I get an error. Is there a way around this?

Using V19.

Thanks
 
You can't interpart copy into an assembly - you do it into a part.
Can you be a bit more specific about what you want to do ?

bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.
 
Simplistically I suppose you'd create a part from that assembly using either insert part copy or possibly simplified assy, save as part (I think that's right). However depending on geometry it doesn't always work and SE don't really condone doing this generally.

KENAT, probably the least qualified checker you'll ever meet...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top