Intermountain RUG meeting
Comfort Suites,
2250 S 1200 W
Ogden, UT
For more info and to register visit: event website
Comfort Suites,
2250 S 1200 W
Ogden, UT
For more info and to register visit: event website
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Intermountain RUG meeting - Ogden, Utah
- Thread starter vball85jb
- Start date
JohnRBaker
Mechanical
Again, I will be presenting 'What's New in NX 9.0' at the 'Intermountain Regional Users Group' meeting on October 4th. In fact, I'll be presenting at 16 of the 17 scheduled RUG's which are planned for this Fall here in the US (I'm only going to miss St. Louis).
For a full list of the RUG's, go to:
Note that the 'Gulf Coast' meeting has been moved to December 5th, in Mobile, AL. Also note that the 'Chicago' and 'Wisconsin' meetings are actually a combined RUG (that's how you get 17 events from the above list).
So if you're interested in attending one of these one-day events near you, please check it out as it will be an opportunity to not only see what it is that we've been spending your maintenance dollars on ;-) but also a chance to hear presentations by other users as to how they're using various products from Siemens PLM and our partners, as well as this being a good chance to network and make new friends within the user community.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
For a full list of the RUG's, go to:
Note that the 'Gulf Coast' meeting has been moved to December 5th, in Mobile, AL. Also note that the 'Chicago' and 'Wisconsin' meetings are actually a combined RUG (that's how you get 17 events from the above list).
So if you're interested in attending one of these one-day events near you, please check it out as it will be an opportunity to not only see what it is that we've been spending your maintenance dollars on ;-) but also a chance to hear presentations by other users as to how they're using various products from Siemens PLM and our partners, as well as this being a good chance to network and make new friends within the user community.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
- Status