Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Interference contact in ANSYS Workbench

Status
Not open for further replies.
krishp

krishp

Mechanical
Joined
Nov 23, 2006
Messages
13
Location
DE
Hello,

Anyone can provide some information how to setup an analysis for a shrink fit system (in ANSYS Workbench). This involves a tool adapter and a drill bit. All we need to calculate the max. torque with which is inducing into the adapter. Any comments will be helpful.

Thanks.
Tobias
 
Status
Not open for further replies.

Similar threads

YuJie_PV
  • Question Question
1/2 loading for 1/2 model in ansys?
Replies
9
Views
10K
YuJie_PV
YuJie_PV
Stress_Eng
  • Locked
  • Question Question
FEM Contact Analysis Variables
Replies
17
Views
14K
Stress_Eng
Stress_Eng
D
  • Locked
Random vibration in ANSYS APDL using results from Linear Perturbation
Replies
1
Views
3K
hacksaw
hacksaw
MrRogers1987
  • Locked
  • Question Question
Contact Conductance in Riveted Joint
Replies
8
Views
2K
geesaman.d
geesaman.d
raslraslov
  • Locked
  • Question Question
Setting up units in nCode when importing d3plot (ANSYS)
Replies
0
Views
577
raslraslov
raslraslov

Part and Inventory Search

Sponsor

Back
Top