Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Intelligent Pigging
- Thread starter Deepray
- Start date
In most cases its not something to worry about unless you also change diameters.
**********************
"Pumping accounts for 20% of the world’s energy used by electric motors and 25% to 50% of the total electrical energy usage in certain industrial facilities." - DOE statistic (Note: Make that 99.99% for pipeline companies)
**********************
"Pumping accounts for 20% of the world’s energy used by electric motors and 25% to 50% of the total electrical energy usage in certain industrial facilities." - DOE statistic (Note: Make that 99.99% for pipeline companies)
IP tools will be configured to suit change in wall thickness along the pipeline, what you need to consider is the tapering of the wall thickness change (1:4 normally. IP tools [both MFL and UT] have a maximum wall thickness limitation for a particular diameter.
I would suggest you consult IP vendors such GE-PII, ROSEN or TDW with your specific data.
Narendranath R
Pipeline engineering is made easy with state of the art computer software, visit www.narendranath.itgo.com.
I would suggest you consult IP vendors such GE-PII, ROSEN or TDW with your specific data.
Narendranath R
Pipeline engineering is made easy with state of the art computer software, visit www.narendranath.itgo.com.
- Thread starter
- #4
About intelligent pigging subject go to
Hope it helps
Luis marques
Hope it helps
Luis marques
- Status
Similar threads
