Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Intelligent pigging on CRA pipeline

Status
Not open for further replies.
FilippoT

FilippoT

Mechanical
Joined
Oct 13, 2013
Messages
34
Location
IT
Is anybody familiar with intelligent pigging on cladded pipeline?
We have a network of 14" pipelines cladded with Nickel 625 metallurgically bounded and we are looking for any references of intelligent pigging for this kind of pipelines?
Considering the low corrosion issue foreseen, is this necessary or at least useful? Is it good to carry out at least a baseline inspection?

Any references on this regards will be more than welcome.

thanks

Filippo
 
Status
Not open for further replies.

Similar threads

K
  • Question Question
Pigging - Unbarred Tee
Replies
0
Views
2K
kirb46
K
Finchh
  • Locked
  • Question Question
Pigging or Flushing a 15 km Non-Uniform pipeline
Replies
2
Views
1K
Finchh
Finchh
sathishsusa
  • Locked
  • Question Question
Pigging Time calculation on Crude line
2
Replies
23
Views
3K
1503-44
1503-44
D
  • Locked
  • Question Question
Nitrogen Pipework for pigging system within EX environment
Replies
7
Views
3K
btrueblood
btrueblood
Yoga Arviansyah
  • Locked
  • Question Question
Gas Pipeline Reversal
Replies
2
Views
2K
GD2
GD2

Part and Inventory Search

Sponsor

Back
Top