Instrument Specification Numbers

[barnesed]

Does anyone know of a list of standard instrument datasheet/specification numbers or a number series?
One engineering company uses 17xxx series
MasterSpec is mainly for builders/architects and does not have a series for instruments/automation.
ISA has a list of datasheet forms but does not have a standard list of specification numbers.

 

[lacajun]

From my experience, that is up to the end user. Some are very organized about drawings and their numbers and others not so much.

 

[JLSeagull]

Most companies are different. I like using the tag number for one device covered by the spec for the spec number.

 

[controlnovice]

What you are looking for may be found here:

http://csinet.org/default.aspx

Or this document:

http://csinet.org/Home-Page-Category/Formats/MasterFormat/About-MF/numbersandtitles.aspx

______________________________________________________________________________
This is normally the space where people post something insightful.

 

[controlnovice]

Looks like section 25 or 26 is instrumentation in MasterSpec?

______________________________________________________________________________
This is normally the space where people post something insightful.

 

[barnesed]

Thanks controlnovice!

I had the 2004 version and this 2011 version has been greatly expanded. Section 40 90 00 looks like what I'm after. I'll have to look at it in more detail.