Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Installing Networked post proccessors

Status
Not open for further replies.
cncpro99

cncpro99

Aerospace
Joined
Jul 23, 2014
Messages
9
Location
US
How can I install post processors from networked drive? when I use the install post utility NX locks up
I am using NX9.03.
Thanks much for any help
cncpro99
 
Sort by date Sort by votes
You can manually copy the files to your postprocesor folder, and edit the template_post.dat file.

Mark Rief
NX CAM Customer Success
Siemens PLM Software
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

S
  • Question Question
Define POST-Actions for Loading from different options
Replies
0
Views
1K
sbjw
S
AlexCLE
  • Locked
  • Question Question
Post builder change full circles to shorter arcs
Replies
0
Views
1K
AlexCLE
AlexCLE
nxexplorer
  • Locked
  • Question Question
NX Post Builder make the coordinate output G01X.25Y-.573 become G01X0.25Y-0.573
Replies
0
Views
326
nxexplorer
nxexplorer
jopek323
  • Locked
  • Question Question
NX Post Builder Rotary AUTOCLAMP
Replies
0
Views
325
jopek323
jopek323
Petetheprogrammer
  • Locked
  • Question Question
Siemens NX Post Builder post processor with Sub programs
Replies
1
Views
842
joycejo
joycejo

Part and Inventory Search

Sponsor

Back
Top