Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Installation torques for UNM instrument screws

Status
Not open for further replies.
Tunalover

Tunalover

Mechanical
Joined
Mar 28, 2002
Messages
1,179
Location
US
Folks-
If anyone has a source of installation torque values for dry (unlubricated) 300 series stainless steel UNM instrument screws into AL6061-T6 internally threaded holes I'd be MUCH obliged! These are pretty tiny. We're using fillister head screws with 1mm and 0.5mm major diameters (but the standards go much smaller!). TIA!






Tunalover
 
Status
Not open for further replies.

Similar threads

GTrinh97
  • Locked
  • Question Question
Screws and Nails
Replies
3
Views
426
3DDave
3DDave
Cormet
  • Question Question
Minimum PWHT cycles for piping
Replies
0
Views
1K
Cormet
Cormet
sdra2
  • Question Question
Weld assessment for lifting beam
Replies
0
Views
3K
sdra2
sdra2
L
  • Question Question
Tension/Bending Checks for C shape in weak axis
Replies
3
Views
10K
ErikBjurSE
E
N
  • Question Question
Weld Size Calculation for Plate Welded Perpendicularly to RHS Beam
Replies
7
Views
19K
ErikBjurSE
E

Part and Inventory Search

Sponsor

Back
Top