Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
instabilities in boilers
- Thread starter enyznf
- Start date
Maybe something less general.
I'll start the list, it may get long.
Control system that add the liquids or let the vapours out being miss tuned.
Flood in the column.
A build up of heavies in the bottom of the shell on a reboiler.
fouling
fuel heat content changing
I'll start the list, it may get long.
Control system that add the liquids or let the vapours out being miss tuned.
Flood in the column.
A build up of heavies in the bottom of the shell on a reboiler.
fouling
fuel heat content changing
- Thread starter
- #3
Variations in fuel heating value will be dictated by your fuel source. If you are burning an off gas from various units the operation of each unit will alter your gas. If you are burning a slop oil or waste organic stream for fuel it will depend on what is being feed into the supply line. If you are using only natural gas I doubt you would see any variations of significance. Same if you are using a specified fuel oil that remains constant.
- Status
Similar threads
- Question