Inspection Bench with threaded holes

[CR100]

We are looking at sourcing a new inspection table that allows fixtures to be easily bolted to the top surface. Similar to the one in the picture in the below link. Can anyone recommend a manufacturer>

http://us.romer.com/images/stories/tis-new-romer.jpg

 

[analogkid2digitalman]

That looks like an optics breadboard. They typically come in English and Metric patterns and hole sizes. If that is the case then:

Newport, Melles Griot, Thor Labs, New Focus, Oriel, Aerotech...

-AK2DM

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"It's the questions that drive us"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

[unclesyd]

Depending on the precision needed you should look at the offerings by Interlakes and American for their machine bases. Machine bases can can be almost anything you desire with very good precision. I have used both companies for making inspection and rebuilding high precision gear pumps.

http://www.interlakesbases.com/index.php

http://www.americangrinding.com/divisions/brute/