Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Inertia center vs center of gravity

Thread starter DaSalo
Start date Dec 4, 2012

Status: Not open for further replies.

Dec 4, 2012

DaSalo

Mechanical

What is the difference between the inertia center of a multi-body catpart as shown in the properties=>mechanical tab and the center of gravity of the same part as shown in the measure item command? The two tools provide slightly difference results for the same part.

CATIA V5 R20
PC-DMIS 2011 MR1