Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

industrial wet vacuum manufacturer

Status
Not open for further replies.

sfxf

Mechanical
Aug 6, 2002
38
I am working on a project, and need a wet vacuum system - vacuum water off the surface of the vehicle after the washing process inside a washing booth. Does anyone know any manufactures dealing with this kind of vacuum? In order to separate the water, does the traditional cyclone separator work? Thanks in advance!
 
Replies continue below

Recommended for you

You could use a liquid ring vacuum pump.
Just google "liquid Ring Vacuum Pump" look for system builders.

Good Luck
pennpoint
 
Have your wife call a carpet cleaning service to come out and clean your carpets. Stay home that day and chat with the operator, ask him to let you look over the machine.

You'd be surprised what you can put through a cast iron "Roots" blower without damaging it; if the rotors get wet, just squirt a little spray lube through it at the end of the day.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor