Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Induced Gas Floatation and Hydrocyclones

Status
Not open for further replies.
bike37

bike37

Petroleum
Joined
Nov 25, 2002
Messages
1
Location
GB
Can anybody suggest a quick way of estimating the size of a hydrocyclone and induced gas floatation vessel? Flowrate is 6m3/hr of water, 2000ppm oil in water into the hydrocyclone, 100ppm oil out of the hydrocyclone and into the IGF, with a required ppm oil of 25.
Thanks!
 
Status
Not open for further replies.

Similar threads

T
  • Question Question
Compressibility of Nitrogen Gas and Liquid Water
Replies
7
Views
5K
georgeverghese
georgeverghese
Prometheus21
  • Question Question
Size andtemperature of compressed gas slug.
Replies
13
Views
12K
LittleInch
LittleInch
Hemal Chauhan
  • Locked
  • Question Question
Floatation test procedure for Extrenal floating roof tank
Replies
2
Views
333
TiCl4
TiCl4
Yoga Arviansyah
  • Locked
  • Question Question
Gas Pipeline Reversal
Replies
2
Views
2K
GD2
GD2
Eric Kelly
  • Locked
  • Question Question
Reduced-Noise Gas Flow Design Guide and spreadsheet by Nelson and NASA
Replies
9
Views
769
Prometheus21
Prometheus21

Part and Inventory Search

Sponsor

Back
Top