Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

indentation problem

Status
Not open for further replies.
afefdridi

afefdridi

Mechanical
Joined
Jan 31, 2011
Messages
72
Location
TN
hello
i am modeling a problem of flat punch indentation with a viscoelastic material(skin).
My problem is that i applied a displacement(relaxation) but the effort is constant;that is if we hold tha displacement i thought that we might have a diminution of the effort wich is not the case.
So my simulation is it ok or not
thanks
 
Status
Not open for further replies.

Similar threads

E
  • Locked
  • Question Question
Mesh Problem
Replies
1
Views
2K
FEA way
FEA way
Adil Memet
  • Question Question
Abaqus Metallurgical phase transformations simulation example running problem
Replies
6
Views
8K
Adil Memet
Adil Memet
G
  • Locked
  • Question Question
Abaqus explicit - general contact problem
Replies
5
Views
18K
FEA way
FEA way
nilesh_dot
  • Locked
  • Question Question
Problem during linking - Abaqus/Standard User Subroutines
Replies
2
Views
1K
nilesh_dot
nilesh_dot
Saks1235
  • Locked
  • Question Question
ABAQUS:- Problem with Concentrated AM model Vs Goldak AM model
Replies
5
Views
2K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top