Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Indentation hardness on a FEM model

Status
Not open for further replies.
victorroda

victorroda

Mechanical
Joined
Dec 1, 2009
Messages
17
Location
ES
Hi all

do you know if it is possible to include indentation hardness as a material propertie in Abaqus?

Thanx in advance

Víctor ^^
 
Status
Not open for further replies.

Similar threads

P
  • Locked
  • Question Question
Abaqus two material model
Replies
2
Views
2K
payal.verma1989
P
D
  • Locked
  • Question Question
How to model a 2-node beam element
Replies
1
Views
1K
FEA way
FEA way
B
  • Locked
  • Question Question
Concentrated Force on a Rigid body reference point
Replies
2
Views
3K
Vishakh_Rajendran
Vishakh_Rajendran
Saks1235
  • Locked
  • Question Question
ABAQUS:- Problem with Concentrated AM model Vs Goldak AM model
Replies
5
Views
2K
FEA way
FEA way
Sakthiiitm
  • Locked
  • Question Question
Regarding section forces and stress in a model
Replies
2
Views
586
Sakthiiitm
Sakthiiitm

Part and Inventory Search

Sponsor

Back
Top