Incorrect Displacement Results

[mmmbordo643]

Hi all,

I have described a displacement boundary condition that starts from 0,0 (time(s), disp(mm)) and ends up at 1,-5 using a tabular amplitude. The problem, is at the end of the 1 second dynamic step, the displacement is -5.283 mm not -5.0 mm. Any idea why this is happening or what could be the cause?

Thanks in advance,
Chris

 

[mmmbordo643]

nevermind, found the answer in a previous posting

Thanks,
Chris

 

[MCC1966]

Hi mmmbordo643

Can you please refeer me to that previous posting as I sometimes encounter the same issue

Thank you,
Mark