Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Incorrect data reading

Status
Not open for further replies.

Kozhevnikov G. D.

Aerospace
Joined
Aug 30, 2021
Messages
1
Location
RU
Hello,

I am engaged in modeling the processes of laser shock hardening. This task have 2 parts. Firstly, you solve a Dynamic Explicit part and I have field of stress.
1_woiqbt.png


The I need to import this field to another one model Static. But after calculations in second part of task I get another field of residual stresses, which is not physical at all. I have the same geometry and mesh.
2_c4nehd.png

3_slmr8q.png


I've been working in abaqus recently, maybe I'm doing basic mistake.
Sorry for my bad English)

I hope for your help, thank you.
 
Try using import functionality, described in the documentation chapter "Transferring results between Abaqus/Explicit and Abaqus/Standard". This technique allows you to import the deformed mesh and associated material state from Explicit to Standard or vice versa.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top