Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Inadvertantly turned off ask box when can't find model

Status
Not open for further replies.

Legrand

Mechanical
Joined
Nov 7, 2002
Messages
22
Location
US
I've got a small problem. I turned off the prompt box that appears when you open a drawing and it can't find the master part and it asks you to locate it. I know that isn't worded very well, but I hope you all know what I mean. I turned it off thinking it would teep asking if I answered "yes". Not the case. I've looked everywhere for how to turn this back on with no luck. Does anyone here know hoe to reactivate this feature?

Thanks...
 
restart swx. i think this setting is only for one session.
 
Man, I have got to stop asking such stupid questions.... I normally leave my computer on with SW running 24/7... Thanks for the speedy reply... Don't suppose there's any way I can remove this post ;)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top