In need of section properties from AISC 5th edition 1

[samchrun]

If anybody here has the 5th edition of the AISC steel manual, i was hoping you can post the section properties of the members below.

-10WF21#
-16WF40#
-12WF27#

-18WF55#
-18WF50#
-16WF40#

Looking for:
-flange width
-Moment of Inertia, I
-Section Modulus, S
-radius of gyration, r

Thanks in advance, even better would be a scanning of the pages.

 

[msquared48]

I've got it. I'll scan and post later today. (Thursday)

Mike McCann
MMC Engineering

 

[samchrun]

Awesome thanks! By the way would you happen to know yield stress for those beams.

 

[msquared48]

I'll post the sections later, but from what I remember, I believe the code mentioned 33 ksi steel, probably A7 steel.

Mike McCann
MMC Engineering

 

[samchrun]

Thanks,I do vaguely remember using 33 ksi steel from another project I worked on.

 

[msquared48]

OK. Here goes with four posts.

WF 8 and 10's:

Mike McCann
MMC Engineering

 

[msquared48]

WF 12 and 14's:

Mike McCann
MMC Engineering

 

[msquared48]

Remainder of WF 14's:

Mike McCann
MMC Engineering

 

[msquared48]

And WF 16's and 18's:

Mike McCann
MMC Engineering

 

[samchrun]

Thank you Mike, that was very kind of you!

 

[msquared48]

You're welcome.

Mike McCann
MMC Engineering