Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

In-line pressure balance expansion joint at Caesar II

Status
Not open for further replies.
Jacks123

Jacks123

Mechanical
Joined
Dec 10, 2013
Messages
2
Location
ES
Hello !!!
New at this !!!... and needing some help to model a In-Line pressure balance expansion joint without any elbow at Caesar II. not convinced with results ... (dwg attached!!)
Thanks !!!!... :)
 
Sort by date Sort by votes
What's your problem exactly ?

Have you read the Caesar II User's Guide ?

Did you use the Caesar EXJ modeller ?
 
Upvote 0 Downvote
The easiest way to model a pressure balanced EJ is to model a axial EJ with effective area=0.
This kind of modelling is true basically.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

R
  • Question Question
"error, the job file is write protected" warning in Caesar ii
Replies
0
Views
209
rafaresma
R
M
  • Locked
  • Question Question
Caesar II - Duvidas sobre Harmonic.
Replies
1
Views
2K
johnengkol
johnengkol
pylandj1
  • Locked
  • Question Question
CAESAR II Hoop Stress
Replies
1
Views
2K
johnengkol
johnengkol
strengnrcook1
  • Locked
  • Question Question
Identifying TEE Types in Caesar II
Replies
3
Views
2K
strengnrcook1
strengnrcook1
nhorizon
  • Locked
  • Question Question
Caesar-II Soil modeler for submerged SOIL
Replies
0
Views
2K
nhorizon
nhorizon

Part and Inventory Search

Sponsor

Back
Top