Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Importing Nastran model

Status
Not open for further replies.
Cedrik

Cedrik

Mechanical
Joined
Jul 11, 2006
Messages
4
Location
CA
Is it possible to import a Nastran model in Ansys cause I haven t found that such files where supported in the documentation.
Thanks.

Cedrik
 
Sort by date Sort by votes
In fact, you just have to use the Ansys workbench and import model.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

vickyiamlucky
  • Locked
  • Question Question
Ansys Symmetry model to full model cut boundary dispacemnt or force bc
Replies
0
Views
725
vickyiamlucky
vickyiamlucky
Jeremy1989
  • Locked
  • Question Question
Difference in Von Mises Results Between Beam Model and 3D Model
Replies
2
Views
547
Stick.
Stick.
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears
andradesilva
  • Locked
  • Question Question
how to print on the screen or export the axial inertia moment of a model, in ANSYS Mechanical APDL
Replies
1
Views
583
gnc89
gnc89
struclearner
  • Locked
  • Question Question
Beams Modeling Bolts “Behavior” Options
Replies
2
Views
2K
struclearner
struclearner

Part and Inventory Search

Sponsor

Back
Top