Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Importing Load combinations from ETABS 2013 to SAFE12
- Thread starter melsawaf
- Start date
In case you are not familiar with ETABS to SAFE export process, you may search and download relevant 'Watch & Learn' video tutorial from CSI website, and watch it to understand the process.
Once you are clear about the general process, you may apply it to your model. You will then need to select all the load cases, you want to transfer to SAFE, using 'Select cases...' option (ETABS version 9), or some similar option in case available in ETABS 2013.
A good structural engineer is often a blessing for others.
Once you are clear about the general process, you may apply it to your model. You will then need to select all the load cases, you want to transfer to SAFE, using 'Select cases...' option (ETABS version 9), or some similar option in case available in ETABS 2013.
A good structural engineer is often a blessing for others.
- Status
Similar threads
- Question
- Locked
- Question
