Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Importing Inventor 6 file to inv 5 or 5.3 series

Status
Not open for further replies.

layth1117

Mechanical
Jan 14, 2003
3
Need help opening or downgrading an inventor 6 in an inventor 5 or 5.3 series work enviorment, any ideas, i can remotly access an inventor 6 station, but for only a breif time, i cannot physically work on it, but is there an export feature or anything in inventor 6 to downgrade or to export to version 5? please help, very much appreciated!
 
Replies continue below

Recommended for you

Don't think you can, but you could try saving it to a third-party format like IGES or STEP?

Excessive accuaracy is a sign of poor breeding. -Socrates.
 
your best bet is to save-copy-as out of R6 and select SAT files. the result will be "dumb" (no parametric intelligence) unfortunately.

there's nothing else you can do really...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top