Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Import only loads into an existing SAFE model

Status
Not open for further replies.
brick2020

brick2020

Structural
Joined
Jul 5, 2013
Messages
15
Location
IN
HI All

Is there a way to import only the Loads& LC's from ETABS into an EXISTING SAFE model that was created using a previous run from ETABS.

I dont want to create a new SAFE model for my revised ETABS model?

Any tips plz..
 
Status
Not open for further replies.

Similar threads

EngDM
  • Locked
  • Question Question
Slab on Grade in Safe
Replies
0
Views
1K
EngDM
EngDM
moyseh
  • Locked
  • Question Question
SAFE 21 Issues
Replies
0
Views
1K
moyseh
moyseh
Luceid
  • Locked
  • Question Question
SAFE slow analysis
Replies
1
Views
1K
Luceid
Luceid
Ali Shariff
  • Locked
  • Question Question
Urgent !!!!!! Safe Analysis show Large Enormous displacement values in Ux and Uy direction
Replies
2
Views
1K
Celt83
Celt83
Hazelhorn
  • Locked
  • Question Question
Understanding CSI SAFE punching shear perimeter (CSA A23.3-14)
Replies
0
Views
1K
Hazelhorn
Hazelhorn

Part and Inventory Search

Sponsor

Back
Top