Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Import Meshed model to Workbench

Status
Not open for further replies.
Krishna2019

Krishna2019

Mechanical
Joined
Apr 1, 2019
Messages
1
Location
US
Hello,

I have a honeycomb model meshed in hypermesh. This is imported to workbench by FE Model. when i input this model to Explicit dynamics module it still asks for Meshing.
How do i proceed further.
Using ANSYS 16.0
Let me know if i am missing any info in here.
 
Status
Not open for further replies.

Similar threads

H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
IJR
  • Locked
  • Question Question
On how and where to insert command snippets inside Workbench mechanical
Replies
2
Views
1K
IJR
IJR
struclearner
  • Locked
  • Question Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
1K
struclearner
struclearner
vickyiamlucky
  • Locked
  • Question Question
Ansys Symmetry model to full model cut boundary dispacemnt or force bc
Replies
0
Views
724
vickyiamlucky
vickyiamlucky
md_salem
  • Locked
  • Question Question
how to do share topology in the design modeler in Ansys Workbench
Replies
1
Views
921
Stick.
Stick.

Part and Inventory Search

Sponsor

Back
Top