Import dxf from google sketchup into RISA-3D 1

[amb005]

Has anyone created a model in google sketchup, exported it as dxf and imported that dxf into RISA? I completed the steps but nothing shows up.... Any input would be appreciated. Thanks!

 

[JoshPlumSE]

The most common mistake make with DXF importing is that RISA only imports LINES as members. The program does not import polylines. If the lines are defined as poly-lines in the DXF file then they will have to be "exploded" before they can be imported into RISA-3D.