Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Implantable wire

Status
Not open for further replies.
mk2000

mk2000

Mechanical
Nov 5, 2001
92
I am interested in an implantable wire for ECG signal transmission. Does any one know who makes such devices/components. The require wire diameter is approximately 0.1-0.2 mm.

MK
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Your best bet is MP35N DFT (28-45% Ag) wire if you want to avoid 304 stainless. If the wire will be exposed to tissue I would recommend Platinum-clad Tantalum. If the wire will be subject to flexing, then you might consider Nitinol. The resistance may be important if you are operating a battery-powered device; in that case MP35N DFT will provide the lowest resistance.
 
Upvote 0 Downvote
I think that the NiTi elastic wire maybe usable, and I can provide this alloy wire for you.

Share the newest technology with anyone for memory alloy materials and its applications.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Francesca27
  • Locked
  • Question
Implantable Electrical Connectors 1
Replies
5
Views
152
mk2000
mk2000
mk2000
  • Locked
  • Question
Cleaning of Active implantable medical Device (as per ISO)
Replies
1
Views
120
sigmanut
sigmanut
ethantg
  • Locked
  • Question
Need Class VI EVA supplier for implantable device 1
Replies
1
Views
104
DylanThomas
DylanThomas

Part and Inventory Search

Sponsor

Back
Top Bottom