Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Impeller Interference Fit Design
- Thread starter at14294
- Start date
ColonelSanders83
Mechanical
I would Start with Mark's handbook and go from there. It is ussually very well referenced.
Or you can crack the textbooks and go pack to first principles.
My fundamentals of engineering supplied reference handbook has the equations for calculating the interface pressure from press or shrink fits followed by the maximum torque that can be transmitted by said fit.
Just my two cents worth.
Always remember, free advice is worth exactly what you pay for it!
Or you can crack the textbooks and go pack to first principles.
My fundamentals of engineering supplied reference handbook has the equations for calculating the interface pressure from press or shrink fits followed by the maximum torque that can be transmitted by said fit.
Just my two cents worth.
Always remember, free advice is worth exactly what you pay for it!
- Status
Similar threads
- Question
