Image on the model

[Pranabesh]

Dear All,
I don't know how can I insert image file(JPG file) in the Pro-e assembly file.
I mean to say, I want to put branding logo(JPG file) on the product (Pro-e Assembly file) . How can I do it ?

Best Regards,
Pranabesh




Edited by: Pranabesh

 

[s_pme20]

you can use DECAl.
That needs image file of your logo.
Search this forum for "decal"

 

[Pranabesh]

Dear,

I have the logo in JPG, but I want to insert in pro-e assembly file & put it on the model.

Pranabesh

 

[tobbo]

as Sachin says:


[url]http://www.mcadcentral.com/proe/forum/search.asp?KW=decal&am p;am p;SM=1&SI=PT&FM=5&OB=1 [/url]


[url]http://www.mcadcentral.com/proe/forum/search.asp?KW=decal+im age&SM=1&SI=PT&FM=0&OB=1 [/url]


//Tobias
Edited by: tobbo

 

[s_pme20]

I think you need this:
for info. I dont work in Google...

NOTE: for logo to remain everytime you open part, set following config.pro options:
texture=yes
texture_search_path= (path where image is stored)

View attachment 5600

 

[Pranabesh]

Dear Sachin,
I have given the path with this way (texture_search_path= (path where image is stored)

2012-04-10_234707_1.rar

then how to put on the model or component,automatically it's not taking.
Please check the attached image file.

Pranabesh

 

[tobbo]

i cant see .rar here.


Did you find the links i provided useful?


More exactly, where do you run into trouble when adding a decal to your part?


//Tobias

 

[s_pme20]

this is my best I can do to explain.
FYI: you set config options in current session only.They will not be saved.
View attachment 5601
Ask if you have any perticular question

 

[Pranabesh]

Dear Sachin,
Very very thanx...... I have done it with your help.

Still I have not use this type of tool ... because of that i wasn't understand your hints
that time.....


Thanx
Pranabesh

 

[s_pme20]

i am glad to know that it was useful!