Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

I'm making some video tutorials for SIEMENS NX. Please give me some feedback. 1

Status
Not open for further replies.

F. S. Farimani

Mechanical
Joined
Jul 17, 2020
Messages
9
Location
NL
Hello everyone,

I'm trying to use my lockdown time to make some video tutorials for SIEMENS NX. I just baked the first part over here:

[URL unfurl="true"]https://youtu.be/l3zWEa4-zQ0[/url]

I would appreciate it if you could take a look and give me some constructive feedback. Thanks for your support in advance.
 
I watched fragments of your tutorial at about 10 time spots for about 15 seconds.
IMHO: Your English is good, but too low information density. 75% of words could be dropped, video reduced to 10 min, if not 5.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top