Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
... I'm looking for a rule of thumb for estimating "Weld-Time"...
- Thread starter DrDarrell
- Start date
MikeHalloran
Mechanical
Not as long as the "prep time", if you're doing it right.
Best way: Measure the achieved linear speed (circumference/time) for a similar weld in similar material by the person whom you'd most likely use to do your welding.
Mike Halloran
Pembroke Pines, FL, USA
Best way: Measure the achieved linear speed (circumference/time) for a similar weld in similar material by the person whom you'd most likely use to do your welding.
Mike Halloran
Pembroke Pines, FL, USA
- Status
Similar threads
- Question
- Question
- Locked
- Question