IGS to Parametric conversion

[PavanR]

Hi friends

here i'm working on Pro/E WF2.0 as per customer requirement.
(usually i work on Pro/E WF4.0)
i need to create parametric model as referring igs file as they provided.
i studied the model fully. and i made a dummy model which resembles input file about 60%... i'm unable to get the model exact same as input...

my problem here is
- i don't know procedure to create the model
- i need to know what are all steps need to take to create this model



if u know about this conversion method plz mail me at :
pavan.ravadi@gmail.com

 

[tobbo]

a pic could help...


And also please ask more specific questions in what you want to know more about.


//Tobias

 

[PavanR]

View attachment 5565





















how to make parametric model from present igs file

 

[looslib]

There is no direct way to make a parametric model from a IGES/STEP file except by remodeling the part.

 

[SRINIVASANIYER1]

Have a look at "Feature Recognition" and download it from
PTC's site. It is free if you are under AMC.
I never had the need for it, hence never tried. You may
evaluate its suitability for your application.