SurajTinani
Materials
Is IGC testing required for Alloy C-22 forging procured as per ASTM B564? If yes which method of ASTM G28 shall be used?
Regards,
Suraj
Regards,
Suraj
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
IGC Testing for Alloy C-22 (UNS N06022)
- Thread starter SurajTinani
- Start date
- Status
It is not a requirement, or supplementary requirement, of B564. Thus, it would have to be a purchaser's specified requirement. NACE Corrosion 2007, Paper 07202 has a good discussion regarding the use of, and acceptance criteria for, ASTM G28A and G28B with N06022.
Steve Jones
Corrosion Management Consultant
All answers are personal opinions only and are in no way connected with any employer.
Steve Jones
Corrosion Management Consultant
All answers are personal opinions only and are in no way connected with any employer.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
