Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

IGC test in SS410s Material

Status
Not open for further replies.
Ronak_Patel

Ronak_Patel

Mechanical
Joined
Jul 26, 2021
Messages
44
Location
IN
We are using SS410S CLAD in Coke Drum at 450 degree temp.

Is IGC test required for SS410S material ?

How IGC is different in ferritic SS than in Austenitic SS ?
 
Sort by date Sort by votes
Please do not double post

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

H
  • Question Question
PAUT TEST
Replies
4
Views
16K
Hoseinazadfar
H
nashki
  • Locked
  • Question Question
Mix System Unit in Design and Material System Unit
Replies
4
Views
3K
nashki
nashki
KD007
  • Question Question
SA-193 Gr.B7M bolt material used in Wet H2S service is not passing requirement of UG44b clause.
2
Replies
20
Views
10K
r6155
r6155
seagal3232
  • Locked
  • Question Question
Pressure test passed but vacuum test failed
Replies
8
Views
1K
r6155
r6155
J
  • Locked
  • Question Question
Supplier for SA612 plate material for PQR
Replies
1
Views
989
fleischfresser
fleischfresser

Part and Inventory Search

Sponsor

Back
Top