Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

If I want a Powerglide without reverse, 1

Status
Not open for further replies.

Matt51

Mechanical
Aug 10, 2003
73
Can I remove the ring gear?
 
Replies continue below

Recommended for you

I don't think so the powerglides are a bit different than any of the three speed transmissions, but in most automatics reversing is accomplished by routing power in the correct sequence through the two planetary gear sets, and the ring gears are not just for that particular purpose.
 
If you do not want reverse you can definitely remove the ring gear and use the planetary for first and second only.
The ring gear only drops in and is not used to retain proper end play.
 
Hi guys, thanks for the input. Looks like the ring gear is largely along for the ride.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor