Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

IEC short circuit study

Status
Not open for further replies.
swiminelectricity

swiminelectricity

Electrical
Joined
Mar 8, 2005
Messages
33
Location
CA
I am doing a short circuit study for Middle East.But there is only ANSI comprehensive study Module available in our SKM software.I tried to change the application to IEC and 50HZ, but there are no related IEC data available in SKM liabrary.Does it really matter if I use the impedance data and utility data under 60HZ? How to manipulate in this case?
 
Status
Not open for further replies.

Similar threads

P
  • Question Question
Short Circuit Brake for wind turbine generator.
Replies
4
Views
4K
jpts
jpts
NickParker
  • Question Question
Sealed Vs Unsealed windings - IEC 60034-18
Replies
1
Views
5K
Gr8blu
Gr8blu
Oblsss
  • Question Question
IEC world - GCB in Medium Voltage Switchgear, surge capacitors & lightning arresters placement
Replies
2
Views
3K
Oblsss
Oblsss
SA07
  • Question Question
How to test short in alternator rotor winding inside the slots?
Replies
6
Views
8K
Gr8blu
Gr8blu
B
  • Locked
  • Question Question
generator circuit breaker.
Replies
6
Views
6K
waross
waross

Part and Inventory Search

Sponsor

Back
Top