My company has been contacted by a Nuclear Plant to modify one of our existing digital pressure controllers to meet their specifications. We have a good handle on meeting the performance specifications, but need assistance getting through some of the guidlines that have been specified such as IEC 1226 and IEC 880. I have been looking for a consulting firm that has experience with this but haven't had any luck. If anyone can help point me in the right direction, I would really appreciate it.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
IEC 1226
- Thread starter tkohl
- Start date
tkohl
Since you posted this over a week ago with no response, I suggest that you put this in another forum -- browse through them and select one that deals with pressure controllers.
Patricia Lougheed
Please see FAQ731-376: Eng-Tips.com Forum Policies for tips on how to make the best use of the Eng-Tips Forums.
Since you posted this over a week ago with no response, I suggest that you put this in another forum -- browse through them and select one that deals with pressure controllers.
Patricia Lougheed
Please see FAQ731-376: Eng-Tips.com Forum Policies for tips on how to make the best use of the Eng-Tips Forums.
- Status