I have a client who asked me to prepare the MEP construction document for an ice rink. I would like to know what the main design requirements are, especially on mechanical side- such as codes, standards, etc. Does the mechanical engineer usually design the ice rink itself or is a third party company would take care of that? Any thoughts on this subject would be greatly appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Ice Rink Design
- Thread starter ssn61
- Start date
I would sub out the rink ice refrigeration part as it is a specialty, and just deal with the HVAC in house. Humidity is a big deal.
ASHRAE 2004 Application Ch 4 Places of Assembly has an ice rink section that will help with where to look and getting the design started.
knowledge is power
ASHRAE 2004 Application Ch 4 Places of Assembly has an ice rink section that will help with where to look and getting the design started.
knowledge is power
- Status
Similar threads
- Locked
- Question
