I need to calculate ice load on structure at Hudson River in NY. I need to find typical characteristics of ice at Hudson River in terms of thickness, typical floating ice sheet dimensions, compressive strength, etc. I appreciate if anybody has some feedback or direct me to where I can find this information. Thanks for your help..
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Ice characteristics at New York River?
- Thread starter Awre
- Start date
bridgebuster
Active member
We designed an esplanade in the East River a few years ago. We used the ice engineering manual by the US Army COE Manual No. EM 1110-2-1612. You should be able to download the pdf.
- Thread starter
- #3
bridgebuster
Active member
The COE manual is very thorough but it does not address specific conditions in the Hudson River. However, you can try contacting the NY District to see if they have any ice survey info. Give them a specific location because at the southern end of the river we rarely see ice.
Also, NYSDOT "Blue Pages" provides some guidance on ice forces.
Also, NYSDOT "Blue Pages" provides some guidance on ice forces.
- Status
Similar threads
- Locked
- Question
- Locked
- Question