Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

I wanted to know the difference bet

Status
Not open for further replies.
Rana741

Rana741

Civil/Environmental
Joined
Nov 4, 2022
Messages
10
Location
EG
I wanted to know the difference between S13 and S23 and how to identify which i should use to output result of shear to model punching
 
Sort by date Sort by votes
Those are shear stresses in different directuons. Check the documentation chapter about conventions. Normally, it’s SXZ and SYZ.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Zivy98
  • Question Question
Why does the electrical potential not go the way I wanted?
Replies
3
Views
7K
FEA way
FEA way
polak7
  • Solved
ECAP - material flows between the punch and the die?
Replies
4
Views
8K
polak7
polak7
abc123ali
  • Locked
  • Question Question
Difference in cohesive zone model results peak force for the same input data
Replies
5
Views
3K
FEA way
FEA way
F
  • Question Question
How to determine G12 if I have E1, E2 and v12?
Replies
2
Views
3K
SWComposites
SWComposites
M
  • Locked
Python script to obtain the Material name of each material in the Abaqus model
Replies
4
Views
5K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top