Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

I need information about specific feed water orifice plate EMCO

Status
Not open for further replies.

negro

Mechanical
Joined
Apr 8, 2003
Messages
5
Location
EC
I have a water leak on this orifice plate (for boilers)and I need information to know how to repair it, the brand of this feed water orifice plate is EMCO and the other data I could find is the number 327957 AZ. I was moving around internet without answers, if you could help me please let me now

Negro
 
What do you mean you have a leak in orifice? Is it orifice flange or orifice itself? If orifice is leaking than you need to replace it. You need to take it out measure the diameter and give it to machinist. Usually a paddle type orifice has a tab attached to it which has most of the information like dia, beta ratio, inlet etc. If you have that info give it to machinist and he will make you another one.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top