Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

I need a small hydraulic pump driven by a servo motor.

Status
Not open for further replies.

PNachtwey

Electrical
Joined
Oct 9, 2004
Messages
779
Location
US
This is for a piece of demo equipment to be used at trade shows.
Does anybody know of such a device or do we need to buy the servo motor, drive and pump and assemble ourselves?


Peter Nachtwey
Delta Computer Systems
 
Parker-Hannifin offers such devices, amongst several others. Google "servo hydraulic power pack" or "servo hydraulic power unit". They are much spendier than a home-grown solution, and generally they are either over- or under-powered for your needs.
 
All the servo-hydraulic power packs that I am aware of use servo-valves to control flow and not servomotors attached to a pump. But it is possible.
 
I will check with our Parker-Hannifin contacts and see if we can barter for a servo pump system. Their incentive is that we would be showing their servo pump at trade shows.


Peter Nachtwey
Delta Computer Systems
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top