Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

I need a basket strainer - 40 microns at 500F

Status
Not open for further replies.

jktwn

Electrical
Jun 12, 2001
47
Does anyone have experience with in-line filtering of hot oil. I am looking for a basket strainer to put in the flow to trap contaminants. This is a positive displacement pumping system that flows 25 gpm at 475F. Fluid capacity is about 25 gallons. Viscosity of the oil is about 0.85 of water.
 
Replies continue below

Recommended for you

Yes, I can put you in touch with a vendor that services the oil and gas industry. Your application is very standard.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor