Does anyone have experience with in-line filtering of hot oil. I am looking for a basket strainer to put in the flow to trap contaminants. This is a positive displacement pumping system that flows 25 gpm at 475F. Fluid capacity is about 25 gallons. Viscosity of the oil is about 0.85 of water.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
I need a basket strainer - 40 microns at 500F
- Thread starter jktwn
- Start date
Try Tim Randall at Jamison Products see
good luck
good luck
- Status
Similar threads
- Question
- Question
- Locked
- Question
- Locked
- Question
