i.get.it training? Es bueno?

[MMike1]

Anyone have any experience with the i.get.it training for SWx? I took one of their courses for Team Center a few years ago and it was ok.

I'm trying to push for the near-exclusive use of SWx at work. They have a mix of 2-D Acad and SWx. The knowledge base is not what it could be. I'm thinking the on-line training could at least be a good start.

 

[CorBlimeyLimey]

thread559-190207

 

[MMike1]

Thanks. I did do a search, but nothing came up. Is the search feature working? I tried some VERY generic searches and nothing came up.....

 

[JMirisola]

It is good training. I've reviewed it a couple of times:

http://designsmarter.typepad.com/jeffs_blog/2007/04/yes_i_have_revi.html

http://designsmarter.typepad.com/jeffs_blog/2006/12/igetit_solidwor.html

I know a number of other people who have used it with great success.

Jeff Mirisola, CSWP
CAD Administrator
SW '07 SP2.0, Dell M90, Intel 2 Duo Core, 2GB RAM, nVidia 2500M

http://designsmarter.typepad.com/jeffs_blog

 

[CorBlimeyLimey]

faq559-1336