Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

i-deas 10 geomod errors

Status
Not open for further replies.
kpmee

kpmee

Industrial
Joined
Mar 16, 2004
Messages
1
Location
GB
Since moving up to i-deas 10NX I get geomod errors when bringing large assemblies on to the desktop from the bin. There is no problem with getting the assembly from the library. I am using a 2.4 Gig machine with .5G ram and am using an quadro4 580 xgl card.

This is freshly migrated assemblies from 8. Any I-deas?
 
Status
Not open for further replies.

Similar threads

bjlasota
  • Locked
  • Question Question
What's the latest and greatest I-DEAS to Solidworks converters?
Replies
4
Views
1K
CADPat
CADPat
Juan_Marcos
  • Locked
  • Question Question
Old version of I-DEAS 9.0?
Replies
2
Views
1K
Tornado220M
Tornado220M
engInfoAlt
  • Locked
  • Question Question
NX I-deas 6.5 - Access denied
Replies
7
Views
1K
I-DEAS
I-DEAS
swale2
  • Locked
  • Question Question
Open native ideas files in NX
Replies
1
Views
899
rothers
rothers
LYukon
  • Locked
  • Question Question
I-Deas 12 model file size
Replies
1
Views
1K
CADPat
CADPat

Part and Inventory Search

Sponsor

Back
Top