i created the border using sketch, how to hide the sketch procedure in the part navigator

[godpaul]

the border option in nx8.5 is not the format we want, so i sketched the border myself

i saw some people's customed border and they dont have "sketch" procedure in the part navigator...

how to get rid of the sketch procedure?


thank you

http://files.engineering.com/getfil...-dc61-4066-a955-ab1900d685b0&file=Capture.PNG

 

[JohnRBaker]

You can't. It's hard to believe that the NX Border Creation function does NOT provide you with enough flexibility to get a usable Drawing border. I'd go back and try it again...

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[godpaul]

Hi john,

But I do have a template drawing whose border doe not look like Siemens border, it doesn't have sketch procedure but in the layer setting, I do see all lines are in one layer which is 211

 

[godpaul]

here is my drawing template, the left lower corner starts with A which is different from NX border, any comments?

 

[godpaul]

http://files.engineering.com/getfil...f9-43e3-8a32-19c65b8701b6&file=a2_drawing.prt

 

[godpaul]

problem solved, thank you very much!!!!!!!!!!

i need to to be more careful...

 

[Toost]

Use File- Export- CGM and export the border.
Delete the Sketch.
File - Import - CGM and import the border.
The imported border will be non-parametric, non associative objects.
exactly as a drawing border should be...

Regards.
Tomas