Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

I-beam out of plumb-2

Status
Not open for further replies.
Sort by date Sort by votes
Not sure what the problem is, but it looks like the cap plate on the supporting column was not level.
 
Upvote 0 Downvote
The plate looked level. The web buckled near the bottom flange.
 
Upvote 0 Downvote
Beam over column without stiffener or bracing at column cap plate level. "Station Square" anyone?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

D
  • Locked
  • Question Question
Structural considerations for having a transfer beam set flush with the joists.
Replies
6
Views
5K
Jesus Jose Ruiz Ruiz
J
L_D_
  • Locked
  • Question Question
Replacing A Steel Composite Beam
Replies
5
Views
1K
JAE
JAE
Mina Kromer
  • Locked
  • Question Question
what is the minimum spacing of rebar in concrete piles?
Replies
5
Views
4K
Mina Kromer
Mina Kromer
L
  • Locked
  • Question Question
What is the best strategy for shoring a structure during the partial demolition of a load-bearing wall in a renovation project?
Replies
3
Views
5K
Laura_mr
L
Useeeer
  • Locked
  • Question Question
Pile cap extension of a Bridge Abutment
Replies
1
Views
2K
HTURKAK
HTURKAK

Part and Inventory Search

Sponsor

Back
Top