Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

I am looking for a standard or spec

Status
Not open for further replies.
jcraig

jcraig

Civil/Environmental
Sep 12, 2002
9
I am looking for a standard or specification that delineates the definition of HI-MODULUS versus LOW-MODULUS epoxies and polymers. I.e., what is the limitations for each to be defined as either a HI-MOD or a LOW-MOD product?
 
Status
Not open for further replies.

Similar threads

703george
  • Question
Anti Static requirement for a non-metallic bushing
Replies
2
Views
5K
TugboatEng
TugboatEng
bcavender
  • Locked
  • Question
What polymer is this (or anything close)?
Replies
4
Views
3K
bcavender
bcavender
1
  • Locked
  • Question
What is the best nylon/polymer filament for a foldable platonic solid with living hinges?
Replies
8
Views
10K
btrueblood
btrueblood
Buckshott00
  • Locked
  • Question
Process Setting for Improved Over-molding to prevent delamination In Molded / Extruded Hytrel
Replies
0
Views
760
Buckshott00
Buckshott00
Tymon
  • Locked
  • Question
Most suitable laminating adhesive film for TPU lamination
Replies
0
Views
306
Tymon
Tymon

Part and Inventory Search

Sponsor

Back
Top Bottom